NBR Glove Dipping

Latex, curing paste and auxiliary products for NBR glove dipping

image 2 edited - NBR Glove Dipping

Market leading NBR latex dispersion and curing packages to meet ASTM and EN standards

Auxiliary products available for each process stage to suit your process requirement

Contact us for more information about our NBR glove dipping solutions

The one-stop shop for materials in NBR glove dipping process

image 9 - NBR Glove Dipping
image 6 - NBR Glove Dipping

Glove properties made with Synthomer 6330

Below are typical properties of gloves made with Synthomer 6330 at a glove weight of ca. 3.5 g, cured at 120°C for 20 minutes, with the two curing systems for comparison: Synthomer CV 3613 and Synthomer CV 3532.
Our product range offers a spectrum of properties to suit your requirements, and we can also tailor-made the curing system and auxiliary products to suit your process and final glove performance.
MATCO’s portfolio for dipped gloves production are fully supported by our global technical service team and MATCO can assist our business partners in finding solutions to your needs. MATCO also offers new development in the next generation of glove products.

Physical Properties (EN and ASTM standards are the minimum requirements)

image 18 - NBR Glove Dipping
image 21 - NBR Glove Dipping
image 19 - NBR Glove Dipping
image 20 - NBR Glove Dipping

Durability, chemical permeation and solvent swell.

With our range of curing systems, we can support you in achieving high quality gloves with robust strength and a range of flexible or stretch property, as well as offering good durability according to international and internal standards. At the same time, the gloves also exhibit good chemical permeation performance.

image 22 - NBR Glove Dipping
image 23 - NBR Glove Dipping
image 25 - NBR Glove Dipping

Product Portfolio

NBR Latex Glove Dipping Portfolio

image 12 - NBR Glove Dipping
ProductTypeFunction
Synthomer 6330NBR LatexLatex binder for glove dipping
Synthomer CV 3532Vulcanisation pasteCrosslinker for Synthomer 6330
Synthomer CV 3613Vulcanisation pasteCrosslinker for Synthomer 6330
Synthomer CC 3504ColourantBlue colourant compatible with Synthomer 6330
Synthomer CC 3502ColourantGreen colourant compatible with Synthomer 6330
Auxiliary ProductTypeFunction
Synthomer CC 3501ColourantTitanium dioxide dispersion for opacity
Synthomer CC 3302ColourantCarbon black dispersion
Synthomer CZ 3505CrosslinkerZinc oxide dispersion for crosslinking
Synthomer CZ 3601CrosslinkerSulphur dispersion for crosslinking
Synthomer CZ 3603Co-acceleratorFor use with Synthomer CV 3613
Synthomer CZ 3404Co-acceleratorFor use with Synthomer CV 3532
Synthomer CU 3703Defoamer agentEliminate air bubble from latex

image 26 - NBR Glove Dipping
ProductTypeFunction
Synthomer CU 3506Coagulant solutionCoagulant for Synthomer 6330
Synthomer CU 3507Release agentGlove demold aid

Application guide

Typical recipes in dipping process

image 12 - NBR Glove Dipping
IngredientQuantityManufacturing Conditions
Synthomer 6330100 parts dryAuxiliary components to be added if required (see options in product portfolio page)
Alkaline e.g. KOH (10%)pH adjusted to 9.5 – 10.5Compound mature time: 8 hours (minimum)
Synthomer CV 35324,4 – 4,8 parts dryTypical curing schedule: 120°C for 10 to 20 minutes depending on film thickness
Synthomer CC 35040,5 – 5 parts dry
Typical compounding recipe for disposable gloves: (*compounding solid content at 18-20%)

image 26 - NBR Glove Dipping
IngredientQuantityManufacturing Conditions
Synthomer CU 350618 – 20% total dry solidDrying Temperature: 100°C for 1 – 3 minute
Synthomer CU 35072 – 5% total dry solidDrying Temperature: 100°C for 1 – 3 minute
Typical coagulant bath recipe
image 4 - NBR Glove Dipping

More information on NBR Glove Dipping solutions? Contact us.