NBR Glove Dipping

Latex, curing paste and auxiliary products for NBR glove dipping

The one-stop shop for materials in NBR glove dipping process

Glove properties made with NBR Latex

Below are typical properties of gloves made with NBR Latex at a glove weight of ca. 3.5 g, cured at 120°C for 20 minutes, with the two curing systems for comparison: Matcure V 3613 and Matcure V 3532.
Our product range offers a spectrum of properties to suit your requirements, and we can also tailor-made the curing system and auxiliary products to suit your process and final glove performance.
MATCO’s portfolio for dipped gloves production are fully supported by our global technical service team and MATCO can assist our business partners in finding solutions to your needs. MATCO also offers new development in the next generation of glove products.

Physical Properties (EN and ASTM standards are the minimum requirements)

Durability, chemical permeation and solvent swell.

With our range of curing systems, we can support you in achieving high quality gloves with robust strength and a range of flexible or stretch property, as well as offering good durability according to international and internal standards. At the same time, the gloves also exhibit good chemical permeation performance.

Product Portfolio

Product	Type	Function
NBR Latex	NBR Latex	Latex binder for glove dipping
Matcure V 3532	Vulcanisation paste	Crosslinker for NBR Latex
Matcure V 3613	Vulcanisation paste	Crosslinker for NBR Latex
Matcure CC 3504	Colourant	Blue colourant compatible with NBR Latex
Matcure SSF PASTE	Colourant	Green colourant compatible with NBR Latex

Auxiliary Product	Type	Function
Addimat WHITE 3511	Colourant	Titanium dioxide dispersion for opacity
Addimat BLACK 3302	Colourant	Carbon black dispersion
Matcure D 3512	Crosslinker	Zinc oxide dispersion for crosslinking
Matcure D 3605	Crosslinker	Sulphur dispersion for crosslinking
Matcure D 3603	Co-accelerator	For use with Matcure V 3613
Matcure V 3405	Co-accelerator	For use with Matcure V 3532
Addimat 3703	Defoamer agent	Eliminate air bubble from latex

Product	Type	Function
Coagulant 3506	Coagulant solution	Coagulant for NBR Latex
Addimat 3507	Release agent	Glove demold aid

Application guide

Ingredient	Quantity	Manufacturing Conditions
NBR Latex	100 parts dry	Auxiliary components to be added if required (see options in product portfolio page)
Alkaline e.g. KOH (10%)	pH adjusted to 9.5 – 10.5	Compound mature time: 8 hours (minimum)
Matcure V 3532	4,4 – 4,8 parts dry	Typical curing schedule: 120°C for 10 to 20 minutes depending on film thickness
Matcure D 3517	0,5 – 5 parts dry

Ingredient	Quantity	Manufacturing Conditions
Coagulant 3506	18 – 20% total dry solid	Drying Temperature: 100°C for 1 – 3 minute
Addimat BLUE 3514	2 – 5% total dry solid	Drying Temperature: 100°C for 1 – 3 minute

More information on NBR Glove Dipping solutions? Contact us.